APX
TM
7500 O5
37
Index
Using Mode Select Feature
Mode Select allows a long press to save your radio’s current
zone and channel to a keypad button; then once programmed, the
short-press of that button or soft key jumps the transmission to
the saved zone and channel.
All the programmable buttons and keypad digit 0 to 9 buttons
allow you to save the frequent used zone and channel.
Procedure:
1 Toggle your zone and channel to the required zone and
channel.
2 Press and hold the digit button you desire to program.
You hear a short, medium-pitched tone when the zone and
channel is saved.
Note: Repeat this procedure to change the zone and channel of
the programmed button.
Short press of the programmed button changes your current
transmission to the zone and channel programmed in this button.
Emergency Button *†
Menu Select Button *
Scan On or Off
Side Button 2
Side Button 3
Keypad
Numbers
0-9 †
To Next Page
Loading...
