If the message is not sent, you hear a low tone,
the display shows Send failed and returns to the
main TMS screen.
Note
You can append a priority status and/or a
request reply to your message. See Priority
Status and Request Reply of a New Text
Message on page 104 for more
information.
You can also select the Save to Drafts
option to save your message in the Drafts
folder to send it at a later time. See
Accessing the Drafts Folder on page 109
for more information.
Sending a Quick Text Message
Quick Text messages are messages that are
predefined and usually consist of messages that are
used most frequently.
Each Quick Text message or Query has a maximum
length of 50 characters. You can select the required
text from the Quick Text or Query.
1 Perform one of the following actions:
• To access this feature via a preprogrammed
button, press the preprogrammed Quick Text
button and proceed to Step 4.
• To access this feature via the menu, proceed
to the next step.
2
or to TMS and press the Menu Select button
directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
•
or to Compose and press the Menu
Select button directly below Sel.
• Press the Menu Select
button directly below
Exit to return to the Home screen.
4
or to Quick Text and press the Menu
Select button directly below Sel for a predefined
message.
5 or to scroll through the list of messages and
press the Menu Select button directly below Sel
to select the required message.
The message appears on the Compose screen,
with a blinking cursor at the end of it. Use the
keypad to edit the message, if required.
To Next Page
Loading...
