Motorola APX 8000 3 - Page 128

If you forget the password, enter ******** to
erase all keys and revert the password in
the radio back to the default password of
01234567.
Changing Your Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Unlock Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
8
Press the Menu Select button directly below Sel.
9 Re-enter the new password.
10
Press the Menu Select button directly below Sel.
The password is updated.
If the two passwords do not match, repeat Steps 5
through 10.
Note
If you enter three incorrect old passwords, the
radio exits the password feature. You cannot
access this feature again until you turn the
radio off and on.
Changing Your Tactical Inhibit Password
1
or to Pswd.
2 Press the Menu Select button directly below
Pswd.
The display shows Change Password screen.
3
or to Tactical Inh Encode Pswd.
4
Press the Menu Select button directly below Sel.
5 Enter the old password.
6
Press the Menu Select button directly below Ok.
7 Enter the new password.
Advanced Features
124
English
BETA