You Hear Tone Name Heard
Priority Channel Re-
ceived
When activity on a priority channel is received.
Emergency Alarm/Call
Entry
When entering the emergency state.
Central Echo When central controller has received a request from a
radio.
Long, Medi-
um-Pitched
Tone
Volume Set When volume is changed on a quiet channel.
Emergency Exit When exiting the emergency state.
A Group of
Medium-
Pitched
Tones
Failsoft When the trunking system fails.
Automatic Call Back When voice channel is available from previous request.
Keyfail When encryption key has been lost.
Console Acknowledge When status, emergency alarm, or reprogram request
ACK is received.
Received Individual
Call
When Call Alert or Private Call is received.
Site Trunking When a SmartZone trunking system fails.
Short, High-
Pitched
Tone
(Chirp)
Low-Battery Chirp When battery is below preset threshold value.
Two High-
Pitched
Tones
GPS Fails When the GPS fails or loses signal.
Ringing Phone Call Received When a land-to-mobile phone call is received.
Gurgle Dynamic Regrouping (When PTT button is pressed) a dynamic ID has been
received.
Talk Permit (When PTT button is pressed) is verifying with the sys-
tem for accepting its transmissions.
Unique,
Low-Pitch-
ed Chirp
New Message When a new message is received.
Unique,
High-Pitch-
ed Chirp
Priority Status When a priority message is received.
Incremen-
tal- Pitched
Tone
Bluetooth Paired When Bluetooth accessory is paired with the radio.
Bluetooth Connected When Bluetooth accessory is connected to the radio.
Decremen-
tal- Pitched
Tone
Bluetooth Unpaired When Bluetooth accessory is unpaired from the radio.
Bluetooth Disconnec-
ted
When Bluetooth accessory is disconnected from the
radio.
A Group of
Very High-
Fall Alert Continuous
Tone
When radio is in Fall Alert mode and prepares to trans-
mit Emergency Alarm when the timer of this alarm
ends.
MN002667A01-AV
Chapter 4 : Status Indicators
31
To Next Page
Loading...
