7.24.12.2
Disabling Transmit Inhibition
Procedure:
1 Press the Transmit Inhibit programmable button.
NOTE: If the user has disabled TX Inhibit using the softkey and then moves the switch to
the position where TX Inhibit is enabled, the new value overwrites the menu value.
The display shows Tx inhibit off. You hear a sequence of short, high‐low tone (Transmit
Inhibit Off tone) to indicate that the transmission is back to normal operation.
MN002667A01-AV
Chapter 7 : Advanced Features
76
To Next Page
Loading...
