3
To remove the antenna, turn the antenna
counterclockwise.
Note:
When removing the antenna, ensure that
the radio is turned off.
Removing and Attaching the Accessory
Connector Cover
The accessory connector is on the antenna side of
the radio. It is used to connect accessories to the
radio.
Note:
To prevent damage to the connector, shield it
with the connector cover when not in use.
1
To remove the accessory connector cover, rotate
the thumbscrew counterclockwise until it
disengages from the radio.
Note:
If the thumbscrew is too tight, use an Allen
wrench at to loosen it first.
Preparing Your Radio for Use
20
English
To Next Page
Loading...
Need help?
General
