ASTRO
®
XTS™ 2500 Model III
58
To install the belt clip:
1. Remove battery before installing or removing the belt
clip.
2. Hold the battery with the back of the battery facing you.
3. Hold the belt clip with the top facing upward, and align
the clip with the slots on the battery back.
4. Slide the belt clip downward into the slots until it clicks
into place.
To remove the belt clip:
1. Pull away the metal tab at the top of the battery clip
from the battery.
2. Slide the clip upward until it comes away from the
radio.
Belt Clip
1
2
To Next Page
Loading...
