ASTRO XTS 2500/XTS 2500I Model II 23
General Radio Operation
Use the Menu Entry ZNUP or ZNDN
Use the Preprogrammed Zone Switch
1 Press U to find ZNUP and
ZNDN.
2 Press and hold D, E, or
F directly below ZNUP or
ZNDN until the zone you want
appears.
Note: Positions of ZNUP and
ZNDN on the display may
differ each time you
release D, E, or F.
Read carefully before
you press.
1 If a control on your radio has
been preprogrammed as the
Zone Switch, move the
Zone Switch to the position
for the zone you want.
Note: If the zone you selected
is unprogrammed, repeat
this step.
2 Press h to confirm the
displayed zone and channel.
ZONE
POL DISP NW
FIRE DISP NW
UNPROGRAMMED
FIRE DISP NW
94C05-F_.book Page 23 Wednesday, May 7, 2008 6:53 PM
To Next Page
Loading...
