ASTRO XTS 2500/XTS 2500I Model II 29
General Radio Operation
Use the Preprogrammed Monitor Button
1 Turn the radio on and select
the desired zone and
channel.
2 Press the Monitor button and
listen for activity. (See the
following Conventional
Mode Operation.)
3 Adjust the Volume Control
Knob if necessary.
4 Press and hold the PTT
button to transmit. The LED
lights RED while
transmitting.
5 Release the PTT button to
receive (listen).
C
94C05-F_.book Page 29 Wednesday, May 7, 2008 6:53 PM
To Next Page
Loading...
