22
Handset settings
Note
The handset name will only be displayed for approximately 20 seconds when no
button is pressed. If you make a mistake, press
n
to delete the last character or
digit.
See “Entering names” and “Writing tips” on page 19.
5.5 Language
1. Press m, scroll d to
HANDSET
and press m.
2. Scroll
d to
LANGUAGE
and press m.
3. Press
u or d to select your preferred language and press m to confirm.
5.6 Key beep
When you press a button on the handset keypad, you will hear a beep. You can
switch these beeps on or o.
1. Press
m, scroll d to
HANDSET
and press m. The display shows
BEEP
.
2. Press
m to select. The display shows
KEYTONE
.
3. Press
m.
4. Press
u or d to select
ON
or
OFF
and press m to confirm.
5.7 Battery low warning beep
When the battery is almost fully discharged, you will hear a warning beep every
minute during a call. You can switch these beeps on or o.
1. Press
m, scroll d to
HANDSET
and press m. The display shows
BEEP
.
2. Press
m.
3. Scroll
d to
LOW BATTERY
and press m.
4. Press
u or d to select
ON
or
OFF
and press m to confirm.
5.8 Out of range warning beep
If the handset goes out of range, you will hear warning beeps during a call. You
can switch these beeps on or o.
1. Press
m, scroll d to
HANDSET
and press m. The display shows
BEEP
.
2. Press
m.
3. Scroll
d to
OUT RANGE
and press m.
4. Press
u or d to select
ON
or
OFF
and press m to confirm.
To Next Page
Loading...
Need help?
General
