Motorola C6 User Manual

32
Using additional handsets
9.2 Register a dierent make of handset to your C6 base
Important
DECT GAP Profile only guarantees that basic calling functions will work correctly
between dierent makes / types of handset and base. There is a possibility that
certain features such as Caller ID will not work correctly.
On the base:
1. Press and hold
p for 5 seconds until you hear two beeps. The base will
remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
9.3 Select a base
If your C6 handset is registered to more than one base (e.g. one at work and one
at home), you can select which base to use.
Each handset can be registered with up to four bases.
1. Press
m, scroll d to REGISTER and press m. The display shows SELECT BASE .
2. Press
m. All the bases that your handset has been registered to will be
displayed, e.g.
BASE 1 2 3 4 . The currently selected base number flashes.
3. Enter the base number that you want to use. Alternatively, press
u or d to
scroll to
AUTO .
4. Press
m to confirm. You will hear a confirmation beep and the display will
return to standby.
Note
If you select
AUTO , your handset will automatically search for and connect to the
base with the strongest signal.
9.4 De-register a handset
Use one handset to de-register another. You cannot de-register the handset that
you are using.
1. Press
m, scroll d to SETUP and press m.
2. Scroll
d to DEL HANDSET and press m.
3. Enter the 4 digit PIN code (default = 0000) and press
m.
4. Enter the handset number that you want to de-register. You will hear a
confirmation beep and the display will return to the previous menu.

Motorola C6 Specifications

General

Brand	Motorola
Model	C6
Category	Cordless Telephone
Language	English