20 Handset settings
NOTE
The handset name will only be displayed for approximately 20
seconds when no button is pressed. If you make a mistake,
press
n to delete the last character or digit.
See “ENTERING NAMES” and “WRITING TIPS” on
page 17.
5.5 Language
1.
Press m, scroll d to
HANDSET
and press m.
2.
Scroll d to
LANGUAGE
and press m.
3.
Press u or d to select your preferred language and
press
m to confirm.
5.6 Key beep
When you press a button on the handset keypad, you will
hear a beep. You can switch these beeps on or off.
1.
Press m, scroll d to
HANDSET
and press m.
The display shows
BEEP
.
2.
Press m to select.
The display shows
KEYTONE
.
3.
Press m to select.
4.
Press u or d to select
ON
or
OFF
and press m to
confirm.
5.7 Battery low warning beep
When the battery is almost fully discharged, you will hear a
warning beep every minute during a call. You can switch
these beeps on or off.
1.
Press m, scroll d to
HANDSET
and press m.
The display shows
BEEP
.
2.
Press m to select.
3.
Scroll d to
LOW BATTERY
and press m.
4.
Press u or d to select
ON
or
OFF
and press m to
confirm.
5.8 Out of range warning beep
If the handset goes out of range, you will hear warning beeps
during a call. You can switch these beeps on or off.
1.
Press m, scroll d to
HANDSET
and press m.
The display shows
BEEP
.
2.
Press m to select.
3.
Scroll d to
OUT RANGE
and press m.
4.
Press u or d to select
ON
or
OFF
and press m to
confirm.
To Next Page
Loading...
Need help?
General
