16
Using the phone
3.1.6 Mute
Mute the microphone so that you can talk to someone else in the room without
your caller hearing you.
1. During a call, press
Mute
. The microphone is muted and
Call muted
is
displayed.
2. Press
Unmute
to turn the microphone back on.
3.1.7 End a call
1. Press e or replace the handset on the base to end the call.
After you hang up, the duration the phone is o-hook is displayed for 2 seconds.
Note
If auto end call is o (see 36) you must press e to end the call. The default
setting is
On
.
3.2 Handset equaliser
This feature clarifies the voice of the person you are talking to, producing a
more natural-sounding voice that is easier to hear and understand.
You can choose from Treble, Alto, Bass or HAC (Hearing Aid Compatibility).
1. On a call, press
Options
, scroll d to
Equaliser
and press
OK
.
2. Scroll u or d to select the required setting and press
Select
.
Note
Depending on the condition and quality of your telephone line, this feature
may emphasise existing line noise. If it becomes dicult to hear, you can
change the setting.
This feature is not available while using the hands-free.
3.3 Switch handset on / o
1. Press and hold e to switch the handset o.
2. Press e to switch the handset on.
3.4 Intercom
If more than one handset is registered to the base, internal calls can be made
between two handsets. The screen displays
Internal call
and the handset
number you are calling.
3.4.1 Call another handset
1. Press
INT
.
• If you only have two handsets, press
Call
to call the other handset.
• If more than two handsets are registered to the base, scroll d to the
number of the handset you want to call and press
Call
.
2. Press e to hang up.
To Next Page
Loading...
