37
Advanced settings
9.5 ECO plus mode
When ECO plus mode is activated and the handset has returned to the
standby screen, after about 30 seconds the transmission power will reduce to
0. This feature is set to
O
by default.
When ECO plus mode is set to on, after a short delay the display shows .
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll d to
Advanced settings
. Press
OK
.
3. Scroll d to
ECO plus mode
and press
OK
.
4. Scroll u or d to select
On
or
O
.
5. Press
OK
to confirm.
6. Press e to return to standby.
9.6 Auto clock on / o
If you have subscribed to Caller ID, the date and time will be set on your base
whenever a call is received. This feature can be set to on or o. This feature is
set to
On
by default.
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll d to
Advanced settings
. Press
OK
.
3. Scroll u to
Auto clock
and press
OK
.
4. Scroll u or d to select
On
or
O.
5. Press
OK
to confirm.
6. Press e to return to standby.
9.7 PIN
The 4-digit master PIN is used when registering or de-registering a handset
and when changing some settings on your CD5. The default setting is 0000.
You can change this PIN for more security.
When entering a PIN, the digits are shown as ****.
1. Press
Menu
, scroll u to
Settings
and press
OK
.
2. Scroll d to
Advanced settings
. Press
OK
.
3. Scroll u to
Change system PIN
and press
OK
.
4. If the PIN is 0000 go to step 5. If the PIN has been changed, enter the
current 4 digit master PIN and press
OK
. (Default setting 0000).
5. Enter the new PIN and press
OK
.
6. Re-enter the new PIN and press
OK
to confirm.
7. Press e to return to standby.
Note
Make a note of your PIN. If you forget your PIN you will need to reset your phone.
To Next Page
Loading...
Need help?
General
