Motorola CLP series Manual

4
English
Cloning Radios using the Multi Unit Charger (MUC)
Note: This MUC allows you to clone up to 2 radios (2 source radios and 2 target radios).
1. To put the source radio into clone mode, press and hold PTT and the “-” button while turning
the radio ON until you hear the Cloning Tone and Double Blinking Yellow on the Smart
Status Glow.
2. Place the source radio into one of the charging pockets that has the “CLONE” label.
3. Turn the target radio ON and place it in the pairing charging pocket that has the “CLONE” label
and start the cloning process.
IXPN4029_
Charging/Cloning
Pocket

Motorola CLP series Specifications

General

Brand	Motorola
Model	CLP series
Category	Two-Way Radio
Language	English