Talking and Receiving
25
Skipping and Removing Channels While Scanning
Scan has two temporary features to make it easier to use.
• Scan advance
If the radio stops scanning on a channel you do not want to listen to, press ] to
resume scanning for the next active channel.
• Nuisance delete
Press and hold [ to temporarily remove a channel from the scan list. The
channel return the next time you use the scan feature.
Programming Mode
26
Programming Mode
Programming mode allows you to change the following settings on your radio:
• Channel
• Frequency
• Interference eliminator code
• Call tones
• Microphone gain
• Scan list (CLS1410 only)
• Available channels (CLS1410 only)
Notes:
• To talk with someone on your two-way radio, the channel (CLS1410 only),
frequency, and interference eliminator code must be the same on both radios.
• You cannot enter programming mode while a VOX accessory is plugged into the
radio.
To Next Page
Loading...
Need help?
General
