Getting Started
19
Turning Your Radio On and Off
See page 13 for a basic radio diagram.
Turn P clockwise to turn the radio on, and counterclockwise to turn the radio off.
When the radio is on, the transmit light on the top of the radio flashes every
3 seconds.
When you turn the radio on, the radio chirps and the display briefly
shows all features and display segments.
The radio then displays the current channel (larger number in the
center) and the frequency assigned to that channel (on the right
indicated by l).
The Interference Eliminator Code displays briefly (indicated by
y), then the current channel remains displayed.
Getting Started
20
Adjusting the Volume
Turn P clockwise to increase the volume, and counterclockwise to decrease the
volume.
Note: Do not hold the radio too close to your ear when adjusting the volume.
Reading the Display
Battery Meter
Programming Mode
Channel
Scan (CLS1410 Only)
Signal Strength and Channel Busy Indicator
Keypad Lock
Frequency and
Interference Eliminator
Code
Microphone Gain and
VOX (CLS1410 only)
Frequency Indicator
Interference Eliminator
Code Indicator
VibraCall
®
Alert Indicator
To Next Page
Loading...
Need help?
General
