_Series Programming Quick Reference
Set a Call
Tone
Press S
until E displays.
Press [
or
] to select 1 , 2 , or 3
for audible call tones, 4 for
VibraCall, or 0 for off (default).
Set the
Microphone
Gain
Press S
until g and ? display.
Press
[
or
]
to select:
1 Low sensitivity
2 Medium sensitivity
3 High sensitivity
Edit the
Scan List*
Press S until
h displays and the
channel number and
Y or n blink.
Press
[
or
]
to select the
channel, then press
T to select
Y
(include channel) or n (exclude
channel).
6864110W15_.book Page 66 Wednesday, April 26, 2023 2:56 PM
To Next Page
Loading...
