Motorola CM360 - Receiving a Call; Cancelling a Call; Ending a Call

16
English
GETTING STARTED
RECEIVING A CALL
1. Turn your radio on and adjust the volume level.
2. Switch to the desired radio channel.
3. If, at any time, a call is received you will hear
the call at the volume level you have set.
Note: The system may have a limited call time and
the call may be terminated automatically if
this call time is exceeded.
CANCELLING A CALL
At any time while setting up a call, it may be cancelled
by pressing the Monitor/Call Cancel button, or
replacing the microphone in its holder (referred to as
going “on hook”) .
The call timer can also cancel a call.
ENDING A CALL
A call should always be ended by pressing the
Monitor/Call Cancel button, or replacing the
microphone in its holder.