10 Getting Started
2. Getting Started
2.1 Power up the Baby Unit
• Place the Baby unit near a suitable electrical outlet in the
room where you’re going to be monitoring your baby most
of the time. It should also be at least 3 feet away from your
baby.
• Plug the micro-USB plug of power adapter (DC5V/1000mA)
into the Baby unit, connect other end to a suitable electrical
outlet.
• Slide the Power
ON
OFF
switch on the side of the baby
unit up to turn it on.
IMPORTANT
Only use the supplied power adapter
.
To Next Page
Loading...
