Motorola CP140

14
English
GETTING STARTED
TURNING THE RADIO ON OR OFF ADJUSTING THE VOLUME
Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to
decrease the volume.
– or – use the pre-programmed Volume Set button
SELECTING A RADIO CHANNEL
Your radio offers 16 channels.
Note: Due to government regulations, some
channels may not be programmed. Ask your
dealer for more information.
To select a channel, turn the Channel Selector
knob clockwise or counterclockwise until you reach
the desired channel.
Turn the On/Off/Volume
Control knob clockwise. If
power-up is successful,
you will hear the Self-Test
Pass Tone ( )
and see the LED flash
green.
If the radio fails to power
up, you will hear the Self
Test Fail Tone
().
The radio will need to be
returned for re-
programming.
Turn the On/Off/
Volume Control knob
counter-clockwise
until you hear a click
and the LED indicator
turns off.
ON OFF
1 Hold down the Volume Set button; you will
hear a continuous tone.
2 Turn the On/Off/Volume Control knob to the
desired volume level.
3 Release the Volume Set button.