14
English
VOICE INVERSION
SCRAMBLING
VOICE INVERSION SCRAMBLING
Your radio has the Voice Inversion Scrambling feature which
gives you an extra layer of privacy. This scrambling function is
implemented via a frequency inversion in analog mode.
Note: This feature needs to be enabled using Customer
Programming Software (CPS) before it can be activated.
To Enable and Disable the Scrambling Mode
Configure one of the programmable buttons for Scrambling
Mode. Press this button to enable or disable the function. You
can also configure this function via the Front Panel Feature
and Button Configuration Mode (See "Entering Front Panel
Feature and Button Configuration Mode" Menu on page 15).
To Change the Scrambling Code
Configure one of the programmable buttons for Scrambling
Code. Press this button to toggle between the two codes. You
can also configure this function via the Front Panel Feature
and Button Configuration Mode (See "Exiting Front Panel
Feature and Button Configuration Mode" Menu on page 15).
Beacon LKP NALA.book Page 14 Wednesday, February 25, 2009 5:34 PM
To Next Page
Loading...
