20 Handset settings
3.
Press u or d to select the ringer melody (1 - 5).
4.
Press m to confirm or n to return to the previous
menu.
NOTE
Calls from the numbers that you have stored in the
phonebook will ring using the ringer melody you have set
when you store the entry.
5.3 Auto answer
Your phone is set to answer calls by lifting the handset off the
base or charger. You can switch this feature off so that calls
can only be answered by pressing
<.
1.
Press m, scroll d to
HANDSET
and press m.
2.
Scroll d to
AUTO ANSWER
and press m.
3.
Press u or d to select
ON
or
OFF
and press m to
confirm.
5.4 Handset name
If you are using more than one handset with your D1O base,
you can set a personalized name for each handset to easily
distinguish between them.
A name can be up to 10 characters long.
1.
Press m, scroll d to
HANDSET
and press m.
2.
Scroll d to
NAME
and press m.
3.
Enter the new handset name and press m to confirm.
NOTE
The handset name will only be displayed for approximately 20
seconds when no button is pressed. If you make a mistake,
press
n to delete the last character or digit.
See “ENTERING NAMES” and “WRITING TIPS” on
page 18.
5.5 Language
1.
Press m, scroll d to
HANDSET
and press m.
2.
Scroll d to
LANGUAGE
and press m.
3.
Press u or d to select your preferred language and
press
m to confirm.
5.6 Key beep
When you press a button on the handset keypad, you will
hear a beep. You can switch these beeps on or off.
1.
Press m, scroll d to
HANDSET
and press m.
The display shows
BEEP
.
2.
Press m to select.
The display shows
KEYTONE
.
To Next Page
Loading...
Need help?
General
