Clock & alarm 25
7. Clock & alarm
If you have subscribed to Caller ID Service, the date and
time will be set on all your handsets whenever a call is
received. You can also manually set the date and time on the
individual handsets.
7.1 Set the date
1.
Press m, scroll d to
DATE-TIME
and press m.
The display shows
DATE SET
.
2.
Press m to select.
3.
Enter the date (e.g. 12--08 for 12th of August) and press
m to confirm.
7.2 Set the time
1.
Press m, scroll d to
DATE-TIME
and press m.
2.
Scroll d to
CLOCK SET
and press m.
3.
Enter the time in 24 hour format (e.g. 18--30 for 6:30pm)
and press
m to confirm.
7.3 Set alarm
Each handset can have a different alarm setting.
1.
Press m, scroll d to
DATE-TIME
and press m.
2.
Scroll d to
ALARM SET
and press m.
3.
Press u or d to select
ON
or
OFF
and press m to
confirm.
4.
If you select
ON
, enter the time in 24 hour format (e.g.
07--30 for 7:30am) and press
m to confirm.
7.4 Switch off alarm ring
When the alarm sounds, press any button to switch it off.
NOTE
If you are using the handset to make a call when the alarm
ring is due, you will hear a beep in the earpiece.
To Next Page
Loading...
Need help?
General
