Motorola D1004 - Transfer an External Call to Another Handset; Three-Party Conference Call

18 Using the phone
• If more than two handsets are registered to the base, their numbers are displayed,
e.g. 2345*. Enter the number of the handset you want to call or press to ring all
handsets.
2. Press > to hang up.
NOTE
If the handset does not belong to D10 range, this function may not be available.
3.11.2 Transfer an external call to another handset
1. During an external call, press .
Your caller is put on hold.
2. Enter the number of the handset you want to call or press to ring all handsets.
If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the caller then press > to transfer the
call. If the other handset does not answer, press to talk to your caller again.
3.11.3 Three-party conference call
1. During an external call, press .
Your caller is put on hold.
2. Enter the number of the handset you want to call or press to ring all handsets.
If there are only two handsets, the other handset is called automatically.
3. When the other handset answers, announce the call then press and hold to
connect both calls. If the other handset does not answer, press to talk to
your caller again.
4. Press > to hang up.