30 Personal settings
7.4 Auto hang up
With Auto hang up switched on, you can end a call by simply replacing the handset on the
base or charger. If switched o, you have to press
>
to hang up. The default setting is
ON
.
1. Press m, scroll
d
to
PERSONAL SET
and press m.
2. Scroll
d
to
AUTO HANG-UP
. Press m.
3. Scroll
u
or
d
to select
ON
or
OFF
.
4. Press m to conrm.
5. Press > to return to standby.
7.5 Display language
You can change the display language.
1. Press m, scroll
d
to
PERSONAL SET
and press m.
2. Scroll
d
to
LANGUAGE
. Press m.
3. Scroll
u
or
d
to select the language you want.
4. Press m to conrm.
5. Press > to return to standby.
7.6 Room monitor on/o
Leave one handset in a room and use another handset to hear sounds in that room.
1. Press m, scroll
d
to
PERSONAL SET
and press m.
2. Scroll
d
to
ROOM MONITOR
. Press m.
3. Press
u
or
d
to select
ON
or
OFF
.
4. Press m to conrm.
5. Press > to return to standby.
When switched
ON
, you can leave this handset in the room you wish to monitor. Only the
microphone is on. Anyone in the room cannot hear you.
7.7 Room monitor
1. Switch a handset’s Room monitor mode setting
ON
and place that handset in the
room.
2. At a second handset, press I and enter the number of the handset you are using
as a room monitor. You can now hear sounds coming from the room.
NOTE
To stop room monitoring at any time, press >.
To Next Page
Loading...
