25Base settings
6.5 Recall mode
This setting is useful to access certain network and PABX/switchboard services.
The default recall time is suitable for your country and network operator. It is unlikely that
you should need to change this setting unless advised to do so.
1. Press
m
, scroll
d
to
SETUP
and press
m
.
2. Scroll
d
to
RECALL
and press
m
.
3. Press
u
or
d
to select
RECALL 1
(short flash time) or
RECALL 2
(long flash time) and
press
m
to conrm.
6.6 Restore default settings
You can restore your D5 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Phonebook and
Calls list. All handset and base settings will also be reset.
1. Press
m
, scroll
d
to
SETUP
and press
m
.
2. Scroll
d
to
DEFAULT
and press
m
.
3. Enter the 4 digit PIN code (default = 0000) and press
m
. The display shows
CONFIRM ?
.
4. Press
m
to conrm or
M
to return to the previous menu. Your D5 will restart
automatically.
6.7 Emergency default
If you have lost your PIN code, you can still restore your D5 to its
default settings.
1. Remove the batteries from the handset.
2. Press and hold
s
while replacing the batteries. The display
shows
DEFAULT.
3. Press
m
to conrm. Your D5 will restart automatically.
6.8 Eco mode
Your D5 oers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
1. Press
m
, scroll
d
to
SETUP
and press
m
.
2. Scroll
d
to
ECO MODE
and press
m
.
3. Press
u
or
d
to select
ON
or
OFF
and press
m
to conrm.
To Next Page
Loading...
Need help?
General
