53Safety, regulatory & legal
Tests for SAR are conducted using standard operating positions with the device transmitting
at its highest certified power level in all tested frequency bands
*
. The highest SAR values
under the ICNIRP guidelines for your device model are listed below:
During use, the actual SAR values for your device are usually well below the values stated.
This is because, for purposes of system efficiency and to minimise interference on the
network, the operating power of your mobile device is automatically decreased when full
power is not needed for the call. The lower the power output of the device, the lower its SAR
value.
If you are interested in further reducing your RF exposure then you can easily do so by limiting
your usage or simply using a hands-free kit to keep the device away from the head and body.
Additional information can be found at
www.motorola.com/rfhealth
.
*
The tests are carried out in accordance with [CENELEC EN50360] [IEC standard PT62209-1].
European Union directives conformance
statement
EU conformance
The following CE compliance information is applicable to Motorola mobile devices that carry
one of the following CE marks:
Hereby, Motorola declares that this product is in compliance with:
•
The essential requirements and other relevant provisions of directive 1999/5/EC
•
All other relevant EU directives
For products that support Wi-Fi 802.11a (as defined in your product information): This device
is restricted to indoor use when operating in the 5.15 to 5.25 GHz (802.11a) Wi-Fi frequency
band.
Head SAR GSM 900 + WiFi + Bluetooth 1.08 W/kg
Body-worn SAR
GSM 850 + WiFi + Bluetooth
0.915 W/kg
0168
[Only indoor use allowed in France
for Bluetooth and/or Wi-Fi]
0168
TinBoost.GSG.ASIA.EMARA_12m.fm Page 53 Thursday, March 1, 2012 3:55
To Next Page
Loading...
Need help?
General
