QUICKSTART GUIDE | DOCKCONTROLLER DC-200 13
RFID READER RF-220 TROUBLESHOOTING
SYMPTOM CAUSE TO REMEDY
Blinking red and green LEDs No connection to VideoManager
Check that the DockController
is connected to a working network
Check that you only have one
RFID reader connected to the DockController
Three beeps and red LED flashing brightly
There are no body-worn camera
left to be assigned
-
Your RFID tag has not been
assigned to a user profile
Speak to your system administrator
Red LED is solid and no
response is given to an RFID swipe
The DC-200 is in Open Mode Speak to your system administrator
To Next Page
Loading...