Motorola FOCUS66-BLK2 - User Account and Camera Setup on Android Devices; Power on and Connect the Camera; Download Hubble for Motorola Monitors App; Run Hubble for Motorola Monitors App on Android Device

Getting Started - Connecting Devices 9
ENGLISH
Android™
3.2 User Account and Camera Setup on Android™ Devices
What you need
• FOCUS66 Camera
• Power adapter for the Camera
• Device with Android
TM
system version 4.2 and above
3.2.1 Power ON and Connect the Camera
• Connect the power adapter to a mains power socket and insert the plug into
the micro USB socket on the back of the Camera Unit.
• Make sure that the ON/OFF switch is in the ON position.
• The Camera’s Red LED flashes after the Camera has finished booting. When
you hear one beep, this means that the Camera is ready for setup.
3.2.2 Download Hubble for Motorola Monitors App
• Go to Google Play™ Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App from Google Play™ Store
and install it on your Android™ device
3.2.3 Run Hubble for Motorola Monitors App on Android™ device
• Ensure that your Android™ device is connected to your Wi-Fi
®
router.
• Run "Hubble for Motorola Monitors" App, enter your account information,
read through the Terms of Service, then select "I agree to the Terms of Use"
before you tap
Create . (Picture A1)
Note
If you already have a Hubble App account, please select Already have an
Account? to go to the next step.
A1