12
Getting started - Connecting Devices
• To pair the camera - Press and hold the PAIR button on the back of the
Camera Unit for 8 seconds. You will then hear a beep tone, followed by a
voice prompt indicating that the Camera is ready for pairing. The LED will
flash Red / Blue.
Pair the device
• Tap DETECT CAMERA.
• The App will automatically search for your Camera, select your Camera from
the list of networks as shown in the pictures A6 below. (Pictures A5, A6, A7)
• The LED on the camera will cycle from Red to Blue.
A5 A6 A7
To Next Page
Loading...
