17
ENGLISH
Getting started - Connecting Devices
• To pair the camera - Press and hold the PAIR button on the back of the
Camera for 8 seconds. You will then hear a beep tone, followed by a voice
prompt indicating that the Camera is ready for pairing. The LED will flash
Red / Blue.
Pair the device
• Go to Settings > Wi-Fi menu on your iPhone
®
/iPad
®
. (Picture i5)
• Select your Camera from the list of networks. (Picture i6)
• Return to the Hubble app to resume setup and press Next (Picture i7)
• Your device will detect available networks (Picture i8)
i6 i7 i8
To Next Page
Loading...
