Radio Mounting
Radio Installation 1-9
6.4 Radio Mounting in an Automotive Dashboard
Figure 1-6
Mounting the complete radio in the dashboard.
To install the radio in an automotive dashboard:
1.
Open the radio cutout in the dashboard and, if necessary, enlarge it to the dimension shown
in Figure 1-6.
2.
Insert the mounting frame into the cutout and bend the six tabs (see Figure 1-7) to hold it in
place. Press the Bezel onto the mounting frame.
3.
Slide the radio into the mounting frame.
Figure 1-7
Mounting Frame Detail.
4.
Make necessary connections to the radio for the power, antenna and accessory connector as
shown in Figure 1-4.
To Next Page
Loading...
