CONVENTIONAL
FEATURES
38
English
• Transmit Inhibit on Busy Mode with Wrong
Squelch Code—you are prevented from trans-
mitting on an active mode with a squelch code
other than your own. If the PL code is the same
as yours, you are allowed to transmit.
• Quick-Key Override—This feature can work in
conjunction with either of the two above
variations. This feature allows you to override
the transmit-inhibit state by quick-keying (two
PTT presses within a programmable period --
the default is one second -- of each other) the
radio.
Note: If you try to transmit (press the PTT) on a
smart PTT mode that is busy, a continuous alert
tone is generated until the PTT is released; the
transmission is inhibited.
• The red LED blinks when the radio is
receiving indicating that the mode is busy.
UG_240_280_EN.fm Page 38 Wednesday, August 14, 2002 10:30 AM
To Next Page
Loading...
