14
English
RADIO CALLS
Receiving a Selective Call
When you receive a selective call, you will hear
either an individual call alert tone
or a group call alert tone
. The LED Indicator lights up
(yellow).
To answer the call:
1. Press the PTT button or Call button.
2. The call terminates automatically when the
conversation ends or when the the Monitor
button is pressed.
EMERGENCY CALL
Your radio can be programmed to give you a one-
button quick access to call a particular radio or
centre (predefined by your dealer) in emergency
situations. This is the Emergency Call.
When you make an Emergency call, your radio goes
into an Emergency state, which can be programmed
to:
• continually give audio feedback,
• give no audio feedback; the radio can receive
and transmit.
1. Press the Emergency button to initiate an
Emergency call.
2. Emergency can be stopped by the following:
• Switching the radio Off and On again.
•A reset message is received by your radio.
• The emergency time duration is reached.
Note: The emergency time duration and reset
message are programmed into your radio
by your dealer.
Should you receive an Emergency call, the
incoming emergency alert tone
will sound.
GP330_UG.book Page 14 Thursday, September 6, 2007 11:51 AM
To Next Page
Loading...
Need help?
General
