55
English
PHONE
PHONE
Your radio allows you to place and receive
telephone calls through trunked and
conventional systems (depending on phone line
availability). Telephone calls through a repeater
allow only one person to speak at a time.
MAKING A PHONE CALL D
THROUGH AN LTR SYSTEM
Note: The following instructions assume your
radio has been programmed as follows by
your dealer using CPS (Customer
Programming Software).
• Dial type: Live
• Access/Deaccess type: Immediate Auto
• Tone Span: Timed - 100 ms tone dura-
tion
To initiate a phone call:
Do the following:
1 Select a trunked zone and talkgroup that have
been programmed for telephone.
2 ) to enter menu mode.
–or–
Press the preprogrammed Phone button, and
skip to step 5.
–or–
Press and release the Speed Dial button to
use the speed dial feature. Then press the (1
to 9) key corresponding to the number you
want to call on the Phone list. Or press 0 if you
want to call the last number dialed. Press the
PTT button. A dial tone sounds. Press the
PTT button again to send the phone number.
–or–
Press and hold the PTT button while dialing a
number. (If your radio has been programmed
for Hot keypad, this is a radio-wide setting).
3 m until
4 ) to confirm
D appears on the LCD screen when you are
in Phone mode.
Phone
Phone
07_Phone.fm Page 55 Wednesday, August 3, 2005 3:26 PM
To Next Page
Loading...
