34
Contacts
Note: Youcanstorenumbersupto64digitslong,
but every 20 digits must be separated by a
pause or wait. See “Creating Pauses and
Waits” on page 38.
• A Speed Dial number — When you store a phone
number, it is assigned a Speed Dial number. You
can accept the default Speed Dial number or
change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by saying
the voice name into your phone. This icon
appears P to the left of the Contacts type icon if
a voice name is assigned.
Note: This is an optional feature. See “Optional
Features” on page 86.
Viewing Contacts
To access Contacts:
Press A under Contcs. -or-
From the main menu, select Contacts. -or-
Ifyouareonacall:Pressm. Select Contacts.
To view entries:
1 From the Contacts list, scroll to the entry you want
to view.
2 If an entry has more than one number or address
stored, <> surrounds the Contacts type icon.
Scroll left or right to view the icon for each number
stored in the entry.
3 Whentheiconforthenumberoraddressyou
want to view is displayed, press A under View.
-or-
If View is not one of your options: Press m. Select
View.
4 Scroll to view the other numbers and addresses
stored for the entry.
Tip: To view more entries, continue scrolling.
Searching for a Name
To search for a name in Contacts:
1 From the Contacts list, press m.
2 Select Search.
3 Enter the name you want to see. See “Entering
Text”onpage29.
4 Press A under Ok.
Your phone finds the name you entered or the
nearest match.
To Next Page
Loading...
