85
Using Settings
•AutoRedial— sets your phone to automatically
redial calls you make when the system is busy.
•CallWaiting— See “Call Waiting” on page 73.
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified number
of rings. When this feature is on, the phone
answers by connecting you to the caller; it does
not send the call to voice mail, unless you are out
of coverage or on the line.
• Minute Beep — causes a beep to sound every
minute of an active call.
•CallDuration— causes the duration of a call to
appear on the phones display when the call ends.
• TTY — lets you use your phone with a TTY
device. See “Making TTY Calls” on page 79.
• Notifications — See “Setting Notification
Options” on page 49.
DC/GC Options Features
The DC/GC Options menu controls how your phone
handles Direct Connect calls and Group Connect
calls:
• Tkgrp Silent — controls whether you hear Group
Connect calls to your Talkgroup. See “Receiving
Group Connect Calls” on page 76.
•TkgrpArea— lets you define your Talkgroup
area.
• One Touch DC — See “Setting One Touch Direct
Connect” on page 75.
•AlertType— controls how your phone notifies
you when you receive Direct Connect calls and
Group Connect calls. See page 83.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
•Line1— sets ring volume for phone line 1.
•Line2— sets ring volume for phone line 2.
• Messages — sets the volume of message
notifications.
• Earpiece — sets the volume of sound coming out
of the earpiece.
• Speaker — sets the volume of sound coming out
of the speaker.
•Keypad— sets the volume of sound associated
with pressing keys and buttons.
•Data— sets the volume of sounds that notifies
you that you are receiving a circuit data call.
Security Features
The Security menu lets you turn security features on
and off and change passwords:
To Next Page
Loading...
