77
Call Timers
2 Press A under Change.
3 Scroll to On if you don’t want to hear Group
Connect calls to your Talkgroup. -or-
Scroll to Off if you want to hear Group Connect
calls to your Talkgroup.
4 Press A under Select.
Call Timers
Call timers measure the duration of your phone
calls, Direct Connect or Group Connect calls, and
circuit data use, as well as the number of Kilobytes
sent and received by your phone:
•LastCall— displays the duration of your most
recent phone call.
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of
all your phone calls.
• DC/GC Reset — keeps a running total of all of
your Direct Connect and Group Connect call
minutes, until you reset it.
• DC/GC Lifetime — displays the total minutes of
all your Direct Connect and Group Connect calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of
all of your circuit data use.
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Selectthefeatureyouwanttovieworreset.
3 To view a feature without resetting: Press A
under Done when you are finished viewing. -or-
To reset a feature: Press A under Reset.PressA
under Yes to confirm.
Note: The values displayed by Call Timers should
not be used for billing. Call timers are
estimates only.
To Next Page
Loading...
