l If you have installed multiple cameras, you can use the Camera Configuration Tool to configure common
settings. For more information, see the help section built into the Camera Configuration Tool.
l If the camera is connected to Control Center, you can use the client software to configure the camera. For
more information, see the IndigoVision Control Center Online Help.
l If the camera is connected to a third-party network management system, you can configure the camera's
specialty features in the camera's web browser interface. For more information, see the IndigoVision Camera
Web Interface User Guide.
For More Information
Additional information about setting up and using the device is available in the following guides:
l IndigoVision Control Center Online Help
l IndigoVision Camera Web Interface User Guide
These guides are available on the IndigoVision Partner Portal.
For More Information 7
To Next Page
Loading...
Need help?
General
