11
ENGLISH
Getting Started
2.3 Connecting the Power Supply of the Parent Unit.
• Connect the small plug of
the power adapter to the
parent unit and the other end
to the electrical outlet. Only
use the enclosed adapter
(5VDC/1000mA).
• Press and hold the POWER
button
0
to turn it ON.
NOTE
• A rechargeable battery (Lithium ion battery 2000mAh) inside the
Parent Unit allows you to move it without losing the link and picture
from the Baby Unit. The battery provides up to 5 hours operation of
the Parent Unit. We recommend charging the for at least 16 hours
before first use, and when the Parent Unit indicates the battery is low.
• When the battery is low, the battery icon
turns RED, and the
Parent Unit will beep every 15 seconds. The battery needs to be
recharged; it will take16 hours to charge fully.
2.4 Desktop Stand of the Parent Unit
• Flip out the stand on the back of the Parent Unit
• Recommend to rotate it by 90 degree to set up the desktop stand.
Step 1Step 2
Reset button
To Next Page
Loading...
Need help?
General
