Why does my Motorola Cell Phone ask for an unlock code to open a feature?
If your Motorola Cell Phone asks for an unlock code when you try to open a feature, it means the application you want is locked. If you don't know the unlock code, see page 38.
Why doesn't my Motorola M900 ring?
If your Motorola Cell Phone does not ring, the ringer might be set to low. Raise the volume using the VOL UP DOWN keys.
How to turn off Motorola Cell Phone if power key doesn't work?
Press and hold the Voice Activation key and the volume down key for one second if you can not turn the Motorola Cell Phone off with the POWER OFF key and switching the power switch to OFF.
Why can't I send or receive calls on my Motorola M900?
If you cannot send or receive calls on your Motorola Cell Phone, make sure your antenna is fully extended and that you have a phone signal. Avoid areas with electrical or radio interference, and obstructions such as bridges, parking garages, or tall buildings.
Why does my Motorola M900 Cell Phone have poor reception and drop calls?
If your Motorola Cell Phone has poor reception and drops calls, ensure your antenna is fully extended and not bent or damaged. Also, make sure you have a phone signal. Stay clear of obstructions like bridges, parking garages, or tall buildings.
Why can't I hear the other party on my Motorola M900 Cell Phone?
If you cannot hear the other party on your Motorola Cell Phone, press the upper volume key during the call to increase the volume. Also, make sure that your phone’s earpiece is not blocked.
What to do if my Motorola M900 doesn't have a signal?
If your Motorola Cell Phone handset doesn't have a signal, make sure your antenna is fully extended. The signal strength indicator should have at least one segment showing. If it doesn't, move to an area with a stronger signal.
How to increase earpiece volume on Motorola Cell Phone?
If the earpiece volume on your Motorola Cell Phone is too low, press the upper volume key on the side of your phone while on a call.
Why does my Motorola M900 Cell Phone make a high/low tone when I try to call?
If you tried to place a call and heard an alternating high/low tone on your Motorola Cell Phone, it means your call didn't reach the wireless system. This can happen if you dialed the number too soon after turning on the phone. Wait until the display says 'Ready' before making a call.
What to do if the other party can't hear me on my Motorola M900 Cell Phone?
If the other party is unable to hear you on your Motorola Cell Phone, ensure your antenna is fully extended and your phone isn't muted. Press UNMUTE to cancel mute. Also, check that your phone’s carrying case or a sticker isn't blocking the microphone.
General| Announced | 2005 |
|---|---|
| Status | Discontinued |
| SIM | Mini-SIM |
| Display Type | Monochrome graphic |
| Phonebook | 500 entries |
| Alert types | Vibration; Downloadable polyphonic ringtones |
| Loudspeaker | No |
| 3.5mm jack | No |
| Antenna | External |
| Messaging | SMS, EMS, MMS |
| Clock | Yes |
| Alarm | Yes |
| Games | Yes |
| Network | GSM |
To Next Page
