Motorola Mag One A8 DMR - Attaching and Removing the Belt Clip; Attaching the Belt Clip; Removing the Belt Clip; Attaching the Universal Connector Cover

3.4
Attaching and Removing the Belt Clip
Attaching the Belt Clip
Procedure:
Align the grooves on the clip with the grooves on the battery and press it downwards until it
clicks.
Removing the Belt Clip
Procedure:
1 To remove the clip, press the belt clip tab away from the battery.
2 Slide the clip upwards and away from the radio.
3.5
Attaching the Universal Connector Cover
When and where to use:Replace the universal connector cover or dust cover when the universal
connector is not in use.
CAUTION: IP54 rating is assured only when the universal connector cover is attached.
Procedure:
Insert the slanted end of the cover into the slots above the universal connector.
MN007472A01-AA
Chapter 3: Getting Started
13