Motorola MBP24 User Manual

17
ENGLISH
Troubleshooting
Cannot hear sound or baby cry from the parent unit
• The volume level in the parent unit may be set too low. Increase
the volume level of the parent unit. Refer to section 3.3 For volume
level settings.
• The parent unit and the baby unit may be out of range with each
other. Reduce the distance between the units, but not closer than 1
metre.
The Digital Audio Baby Monitor system produces a high-
pitched noise
• The parent unit and the baby unit are too close to each other. Make
sure that the parent unit and baby unit are at least 1 metre away
from each other.
• The speaker volume of the parent unit may be set too high.
Decrease the volume of the parent unit. Refer to section 3.3 for
volume level settings.
Battery pack in the parent unit is running low quickly
• The volume level of the parent unit may be set too high, which
consumes power. Decrease the volume level of the parent unit.
Refer to section 3.2 for volume level settings.

Motorola MBP24 Specifications

General

Night-light	-
Display type	LCD
Product color	White
Volume control	Buttons
Backlight color	Orange
Built-in display	Yes
Maximum range	- m
Frequency range	1881.792 - 1897.344 MHz
Channels quantity	10 channels
Operating temperature (T-T)	10 - 40 °C
Battery voltage	2.4 V
AC input voltage	100-240 V
Battery capacity	750 mAh
AC input frequency	50 - 60 Hz
Battery technology	Nickel-Metal Hydride (NiMH)
Receiver power source	AC
Transmitter power source	Battery