Motorola MBP24 - Troubleshooting; Parent unit power;link indicator not working; Parent unit indicator flashes, Not Linked displayed

16
Troubleshooting
6. Troubleshooting
Power/Link Indicator on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly installed and
that they are not drained.
• Recharge the parent unit by connecting it to the mains power.
Power/link indicator on the parent unit flashes and ‘Not Linked’
displayed on the screen.
• The parent unit and the baby unit may be out of range with each
other. Reduce the distance between the units, but not closer than 1
metre.
• The baby unit may be powered o. Press and hold
0
to power on
the baby unit.
Indicator on the parent unit screen flashes
• Battery pack in the parent unit is running low. Connect the parent unit
to the mains power with the supplied power adapter for recharging.
The parent unit beeps
• The parent unit may have lost connection with the baby unit.
Reduce the distance between the parent unit and the baby unit,
but not closer than 1 metre.
• The baby unit may be powered o. Press and hold
0
to power on
the baby units.
• Battery pack in the parent unit is running low. Connect the parent
unit to the mains power with the supplied power adapter for
recharging.