Cleaning 19
ENGLISH
6. Cleaning
Clean the MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 with a slightly damp or
anti-static cloth.
Never use cleaning agents or abrasive solvents.
Cleaning and care
• Please make sure the probe is clean to ensure an accurate reading.
• The probe tip is the most delicate part of the thermometer. Use with care
when cleaning the probe tip to avoid damage.
• Use a 70% alcohol swab or a soft cotton moistened with 70% alcohol solution
to clean the probe lens.
• Allow the probe to fully dry for at least 1 minute.
• Keep the unit dry and away from any liquids and direct sunlight.
• The device should not be submerged into liquids.
• Keep your MBP27T, MBP27T/2, MBP27T/3, MBP27T/4 away from hot, humid
areas or conditions, strong sunlight and avoid moisture.
• Every effort has been made to ensure high standards of reliability for your
MBP27T, MBP27T/2, MBP27T/3, MBP27T/4. However, if something does go
wrong, please do not try to repair it yourself – contact Customer Service for
assistance.
To Next Page
Loading...
