16 Using Your Digital Video Baby Monitor
When pairing is successful, the screen displays , followed by the image from
the newly paired baby unit.
NOTE
If pairing fails, the screen displays . Try the pairing process again. Only one
baby unit can be paired at a time.
3.12 Talk to the baby unit
You can use the TALK function of the parent unit to talk to and comfort your
baby.
To talk to the baby unit:
1. Press and hold
T when viewing a baby unit.
2. Speak towards the microphone on the parent unit.
Your voice is broadcast to the baby unit.
3.13 Reset settings to default
1. Press and hold when the parent unit is not in use. At the same time, press
three times consecutively.
2. Release , and then press
again immediately.
All settings will be reset to default.
To Next Page
Loading...
