Motorola MBP843CONNECT Quick Start Guide

US EN
A. Connect the Camera Unit to the power supply.
• Insert the Power Adapter plug into the micro
USB socket at the back of the Camera Unit.
• Connect the other end of the Power Adapter
into a suitable electrical outlet.
• Switch the ON/OFF button to the ON
position. The colored LED will now start
flashing slowly.
Power adapter plug
Switch to turn ON the camera
Red
Black
B. Parent Unit battery installation.
• The rechargeable battery pack supplied
should be installed so that the Parent Unit can
be moved without losing the link and picture
from the Baby Unit(s).
• Charge the battery in the Parent Unit before
you use it for the first time or when the Parent
Unit indicates that battery is low.
• Insert the wire tabs of the rechargeable
battery pack into the contact slots as shown
and fit the battery pack into the compartment.
QUICK START GUIDE
For a full explanation of all features and instructions, please refer to the User’s Guide.
1. Setting up your Wi-Fi
®
Video Baby Monitor
MODELS:
MBP843CONNECT
MBP843CONNECT-2
MBP843CONNECT-3
MBP843CONNECT-4
WARNING:
Strangulation Hazard.
Children have
STRANGLED in cords.
Keep this cord out of
the reach of children
(more than 3ft (1m)
away). Never use
extension cords with
AC Adapters. Only use
the AC Adapters
provided.

Motorola MBP843CONNECT Specifications

General

Display	Yes
Display Size	4.3 inches
Camera	Yes
Night Vision	Yes
Two-way Communication	Yes
Wi-Fi Connectivity	Yes
Range	1000 feet
Room Temperature Monitoring	Yes
Sound and Motion Detection	Yes
Mobile Viewing	Yes
Split Screen Viewing	Yes
Lullabies	Yes
Multiple Camera Support	Yes
Sound Activation	Yes
Power Source	AC Adapter and Rechargeable Battery
Type	Video Baby Monitor