Getting Started 5
ENGLISH
2. Getting Started
2.1 Installing your device
The above illustration refers to a left-hand drive car. For
right-hand drive cars, please flip the position of the
cable installation accordingly.
• Install your device within the rear-view mirror area and
within the wiper cleaning area to get the clearest
possible view.
• Your device comes with a 3.6m USB power cable,
organise the power cord so that it doesn't interfere
with the driver's vision; use cable clips to secure the
power cord if necessary.
• Place the device on the windshield mount first. Press
the suction cup of the mount to the windshield and
turn the knob clockwise to lock. Ensure that the
mount is safely attached to the windshield.
Best Installation Location
To Next Page
Loading...
Need help?
General
