Using your dashboard camera 12
IMPORTANT!
Due to technical reasons the Parking mode must be
disabled by default. You can enable it in the video
settings, see 4.2 Video Settings.
3.6 SOS mode
In case of emergency you can trigger the SOS mode
by long pressing on the Mute/SOS button . When
enabled, the SOS mode will save the footage current
recording cluster.
3.7 Motion detection
To save memory on your SD card, you can enable
motion detection. When enabled, the device will
stop recording when it does not detect motion for
more than 10 seconds.
IMPORTANT!
This option is disabled by default, enabling it might
cause the camera not to record or save part of an
incident or accident you might be involved in.
To Next Page
Loading...
Need help?
General
